Bill of Materials
=================

The Mega V is available in 19" and 35" sizes along with many options including MDF or T-Plate beds,
4th axis, with or without homing switches, and touchplates as well as many others.   The following
tables cover the major components in a bit more detail than the official `Box Contents <https://s24914.pcdn.co/wp-content/uploads/2020/03/Mega-V-Box-Schedule.pdf>`_.


19" Mega V Contents (Needs to be confirmed)
-------------------------------------------
.. csv-table::
   :header: "Item", "Quantity"
   :widths: 20, 5

   "Gantry rail", 1
   "19 Inch rails", 2
   "NEMA 23 Motors", 3
   "Drag Chain Supports", 3
   "Gear Rack track", 3
   "Left Gantry Plate", 1
   "Right Gantry Plate", 1
   "X Gantry Plate", 1
   "Y End Plates", 4
   "Z Plate", 1
   "Z Screw Plate", 1
   "Long sub-frame extrusions", 2
   "Short sub-frame extrusions", 1
   "X/Y Motor Mount Plates", 3
   "Z Motor Mount Plate", 1
   "Z Homing switch bracket", 1
   "Z Motor Coupler", 1
   "Pinion Gears", 3
   "MDF Bed Half (optional)", 2
   "10 inch wide T-Plate(optional)", 2
   "4 inch wide T-Plate(optional)", 1
   "Short Yellow T-Plate Joiner", 2
   "Very Short Yellow T-Plate Joiner", 2
   "V-Wheel", 12
   "Bearings", 24
   "White UHMW Plastic Z Screw Seat", 1
   "Large T-Nuts", 18
   "Small T-Nuts", 38
   "5/16 x 3/4 button cap screws", 8
   "2.5mm Spacers", 12
   "6.35mm Spacers", 4
   "M3x10mm button cap screws", 24
   "M3x16mm machine screws", 8
   "M4x10mm machine screws", 2
   "M4x12mm machine screws", 24
   "M4x14mm machine screws", 4
   "M4x20mm machine screws", 3
   "M4 Nylock Nuts", 6
   "M4 Nylock Washer", 2
   "M4 Split Lock Washer", 1
   "M5x12mm button cap screws", 28
   "M5x16mm machine screws", 2
   "M5x18mm machine screws", 16
   "M5x20mm button cap screws", 4
   "M5x20mm machine screws", 10
   "Pronged T-Nuts", 32
   "M5 Nylock Nuts", 2
   "M5 split lock washers", 16
   "M6 Flat Washers", 6
   "M8x40mm machine screws", 12
   "M8 flat washers", 12
   "M8 nylock nuts", 12
   "M8 eccentric spacers", 6
   "M8 fixed spacers", 6
   "#10x1 inch self drilling screws", 24
   "Z Linear bearing rails", 2
   "Router Mount", 1
   "Anti-Backlash Nut", 1
   "Homing switches", 3
   "<INSERT PARTS IN HOMING KIT>", 0



35" Mega V Contents (Needs to be confirmed)
-------------------------------------------
.. csv-table::
   :header: "Item", "Quantity"
   :widths: 20, 5

   "Gantry rail", 1
   "35 Inch rails", 2
   "NEMA 23 Motors", 3
   "Drag Chain Supports", 3
   "Gear Rack track", 3
   "Left Gantry Plate", 1
   "Right Gantry Plate", 1
   "X Gantry Plate", 1
   "Y End Plates", 4
   "Z Plate", 1
   "Z Screw Plate", 1
   "Long sub-frame extrusions", 2
   "Short sub-frame extrusions", 1
   "X/Y Motor Mount Plates", 3
   "Z Motor Mount Plate", 1
   "Z Homing switch bracket", 1
   "Z Motor Coupler", 1
   "Pinion Gears", 3
   "MDF Bed Half (optional)", 2
   "10 inch wide T-Plate(optional)", 4
   "Long Yellow T-Plate Joiner", 2
   "Very Short Yellow T-Plate Joiner", 2
   "V-Wheel", 12
   "Bearings", 24
   "White UHMW Plastic Z Screw Seat", 1
   "Large T-Nuts", 18
   "Small T-Nuts", 48
   "5/16 x 3/4 button cap screws", 8
   "2.5mm Spacers", 12
   "6.35mm Spacers", 4
   "M3x10mm button cap screws", 24
   "M3x16mm machine screws", 8
   "M4x10mm machine screws", 2
   "M4x12mm machine screws", 24
   "M4x14mm machine screws", 4
   "M4x20mm machine screws", 3
   "M4 Nylock Nuts", 6
   "M4 Nylock Washer", 2
   "M4 Split Lock Washer", 1
   "M5x12mm button cap screws", 33
   "M5x16mm machine screws", 2
   "M5x18mm machine screws", 16
   "M5x20mm button cap screws", 4
   "M5x20mm machine screws", 10
   "Pronged T-Nuts", 32
   "M5 Nylock Nuts", 2
   "M5 split lock washers", 16
   "M6 Flat Washers", 6
   "M8x40mm machine screws", 12
   "M8 flat washers", 12
   "M8 nylock nuts", 12
   "M8 eccentric spacers", 6
   "M8 fixed spacers", 6
   "#10x1 inch self drilling screws", 24
   "Z Linear bearing rails", 2
   "Router Mount", 1
   "Anti-Backlash Nut", 1
   "Homing switches", 3
   "<INSERT PARTS IN HOMING KIT>", 0